What is a mixing machine?

Laboratory mixers are used to mix smaller quantities of material, typically up to 100 gallons (380 liters). Its type, size, speed, power and other parameters will affect the mixing effect of the stirring medium. Lab mixers can also handle solutions with viscosities up to 150,000 cps, depending on mixer torque, horsepower and speed.The drive motor of the laboratory mixer adopts a series-excited micro-motor with high power and compact structure, which has low noise and stable operation, and is suitable for experimental fields such as food, biology, pharmacy, physical and chemical analysis, and reagents.

Hydraulic lift mixer generally refers to a single-shaft mixer; it is used for medium and batch production and has the function of stirring and mixing. It can be equipped with a frequency converter for various speed regulation or constant speed operation; it can run for a long time, with stable operation and low noise. Widely used in color paints, inks, dyes, adhesion, ceramic glazes, magnetic materials, non-metallic materials and other dispersion pastes,
It is a good solution for mixing, dispersing and dissolving.

High viscosity mixers are mixers designed to mix materials through a laminar mixing process because the ingredients are so viscous that a turbulent mixed phase cannot be obtained at all, or without a lot of heat. , allowing any machine suitable for performing a wide range of mixing operations, including emulsification, homogenization, disintegration, dissolution, dispersion, mixing, particle size reduction and deagglomeration. Some products that may require laminar mixing in a high viscosity mixer include putties, chewing gum and soap. Final products typically start in the hundreds of thousands of centipoises and go up to several million centipoises.

Mixing Machine For Dye Mixing Machine Chemical Powder Liquid Belt Mixer can also be equipped with jacket for vessel. It can be heated, cooled or vacuumed in the jacket. The internal pressure of the jacket is less than 0.1 Mpa (the pressure can be customized). The two layers of threaded belt make the material convection to achieve the mixing effect quickly. There is a discharge valve in the middle of the bottom of the container. The drive part adopts a separation device, that is, the motor is connected with the reducer through a belt.